I have two identical HDR Fox T2 machines, which have identical customised firmware settings settings.
One machine, the oldest of the two, displays a bright 'red-ring' when turned off using the remote and when turned on with the remote, displays a 'blue-ring' which can hardly be seen.
The...
I have two HDR-FOX T2 machines, both in the same room and TV unit.
I am having trouble with both remote controls and that of the TV too. I am considering buying a single remote control for both Humax's and the Panasonic TX-55AS802B TV rather than taking them apart to clean etc.
I am looking at...
I have an HDR Fox T2 which was failing to shut down properly and now I find it has a HD problem:
It showed that two recordings were taking place but one stopped and recorded blank, the other never started and was always blank. I stopped both and tried an immediate recording of a watched...
There are two options in the first pop-up after selecting 'Save last streamed content xxx MiB', 'Save' and 'Cancel'
Selecting 'Save' has the same effect as 'Cancel'
/media/My Video
The 'Rename' option appears to have a ghost 'Upload' behind it. It looks as it it is caused by the menu being truncated when a selection is made on the 4th OPT+ from the top and those below.
HDR Fox T2 - two identical boxes both with identical settings and one has recently started not returning to standby over night.
The disable-ota is set on both boxes. I ensure the box 'red ring' is black and when I notice it sometime the next day the ring is blue and the HD is running as if it...
I have changed my email address, and did not get an email response. When I visit the RS web page I find this:
"Last seen: 12:00 am on Thursday, 1st January 1970"
None of the options are usable on the page.
The response to the change in settings showed the the status was active and and account...
I have two HDR-FOX T2 boxes and want to use a universal remote control because of the total number of items of equipment that I have each controlled be a separate remote.
Assuming all remotes could be replaced by a universal remote, I purchased an Inteset 4-in-1 universal remote control which...
I have Alexa (named Echo) and tomorrow will have a Harmony IR Blaster which will be controlled by 'Echo'.
I have a Panasonic Smart TV, two Fox T2's a Sharp sound bar and one always on Raspberry Pi, all of which I will /hope to control via Echo.
I don't have a manual for the blaster yet but it...
I have acquired a Sony Sound Bar for use with my Panasonic TV and this is working fine for the TV. Having set the sound level for the TV, when I turn it on it retains that sound level, needing no intervention.
However, if I change the TV source to a Humax, the sound is far to loud. It has to be...
I use a VPN and due to that I am unable to use my Humax to watch or save programs via the Humax Portal.
I have found this page thanks to a post by Black Hole:
WiFi dongle (click)
and
Expensive (click)
I ask if anyone is using a WiFi dongle with the HDR-FOX T2 which they can recommend. I can...
I have two HDR-FOX T2 and one of them crashes often. It seems slow when using catchup and saving.
Is there a procedure for refreshing the system such as installing the latest official firmware and then the customised firmware?
FOX HDR-T2 with latest Custom Firmware.
We recently had two power outages in quick succession whilst this box was working I think. Although I cannot be sure it started then we have been losing recordings.
I found the firmware was out of date and installed the latest. I noticed we had begun to...
I want eventually to create a Wake on WAN facility for a Linux machine.
To date I have a pi connected via an Ethernet cable to the Linux machine. The pi has a wifi adaptor and is connected to the router.
From the Linux machine I am able to browse shares on a Windows 10 machine and on the pi...
Both my HDR-FOX T2 boxes have old custom firmware installed and i want to update.
Is it ok to make the jump in one step to 3.13?
Custom firmware version: 3.03 (build 2368)
Humax Version: 1.03.12 (kernel HDR_CFW_3.03)
Loader Version: a7.31
System ID: 80bc.7e00
I have come across some .mkv files (74) of them which use an Opus codec, an open source codec.
My Panasonic TV is unable to play these and neither can my Humaxes/ My s8 phone can but it means my phone is tied up for 74 hours!
I was wondering if it was possible to install this codec on a Humax?
Does the below apply to the HDR Fox T2? (Taken from How To Transfer Files To and From HD/HDR Fox)
snip>
The result is that the file system can be viewed and manipulated from within Windows (or other operating systems) using the native file manager
For access from a Windows computer, on the...
I have two identical HDR Fox T2 machines, which have identical customised firmware settings settings.
One machine, the oldest of the two, displays a bright 'red-ring' when turned off using the remote and when turned on with the remote, displays a 'blue-ring' which can hardly be seen.
The...
I have two HDR-FOX T2 machines, both in the same room and TV unit.
I am having trouble with both remote controls and that of the TV too. I am considering buying a single remote control for both Humax's and the Panasonic TX-55AS802B TV rather than taking them apart to clean etc.
I am looking at...
I have an HDR Fox T2 which was failing to shut down properly and now I find it has a HD problem:
It showed that two recordings were taking place but one stopped and recorded blank, the other never started and was always blank. I stopped both and tried an immediate recording of a watched...
There are two options in the first pop-up after selecting 'Save last streamed content xxx MiB', 'Save' and 'Cancel'
Selecting 'Save' has the same effect as 'Cancel'
/media/My Video
The 'Rename' option appears to have a ghost 'Upload' behind it. It looks as it it is caused by the menu being truncated when a selection is made on the 4th OPT+ from the top and those below.
HDR Fox T2 - two identical boxes both with identical settings and one has recently started not returning to standby over night.
The disable-ota is set on both boxes. I ensure the box 'red ring' is black and when I notice it sometime the next day the ring is blue and the HD is running as if it...
I have changed my email address, and did not get an email response. When I visit the RS web page I find this:
"Last seen: 12:00 am on Thursday, 1st January 1970"
None of the options are usable on the page.
The response to the change in settings showed the the status was active and and account...
I have two HDR-FOX T2 boxes and want to use a universal remote control because of the total number of items of equipment that I have each controlled be a separate remote.
Assuming all remotes could be replaced by a universal remote, I purchased an Inteset 4-in-1 universal remote control which...
I have Alexa (named Echo) and tomorrow will have a Harmony IR Blaster which will be controlled by 'Echo'.
I have a Panasonic Smart TV, two Fox T2's a Sharp sound bar and one always on Raspberry Pi, all of which I will /hope to control via Echo.
I don't have a manual for the blaster yet but it...
I have acquired a Sony Sound Bar for use with my Panasonic TV and this is working fine for the TV. Having set the sound level for the TV, when I turn it on it retains that sound level, needing no intervention.
However, if I change the TV source to a Humax, the sound is far to loud. It has to be...
I use a VPN and due to that I am unable to use my Humax to watch or save programs via the Humax Portal.
I have found this page thanks to a post by Black Hole:
WiFi dongle (click)
and
Expensive (click)
I ask if anyone is using a WiFi dongle with the HDR-FOX T2 which they can recommend. I can...
I have two HDR-FOX T2 and one of them crashes often. It seems slow when using catchup and saving.
Is there a procedure for refreshing the system such as installing the latest official firmware and then the customised firmware?
FOX HDR-T2 with latest Custom Firmware.
We recently had two power outages in quick succession whilst this box was working I think. Although I cannot be sure it started then we have been losing recordings.
I found the firmware was out of date and installed the latest. I noticed we had begun to...
I want eventually to create a Wake on WAN facility for a Linux machine.
To date I have a pi connected via an Ethernet cable to the Linux machine. The pi has a wifi adaptor and is connected to the router.
From the Linux machine I am able to browse shares on a Windows 10 machine and on the pi...
Both my HDR-FOX T2 boxes have old custom firmware installed and i want to update.
Is it ok to make the jump in one step to 3.13?
Custom firmware version: 3.03 (build 2368)
Humax Version: 1.03.12 (kernel HDR_CFW_3.03)
Loader Version: a7.31
System ID: 80bc.7e00
I have come across some .mkv files (74) of them which use an Opus codec, an open source codec.
My Panasonic TV is unable to play these and neither can my Humaxes/ My s8 phone can but it means my phone is tied up for 74 hours!
I was wondering if it was possible to install this codec on a Humax?
Does the below apply to the HDR Fox T2? (Taken from How To Transfer Files To and From HD/HDR Fox)
snip>
The result is that the file system can be viewed and manipulated from within Windows (or other operating systems) using the native file manager
For access from a Windows computer, on the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.